How to use the fruit and vegetable washing machine correctly?

Update:16-06-2021
Summary:

Our users who use vegetable washing machines know that […]

Our users who use vegetable washing machines know that the maintenance of equipment is particularly important. Moreover, the normal maintenance of the machine can greatly exert the service life of the equipment. It can be said that maintenance is essential for the machine. As for what is the correct repair and maintenance, it will be introduced based on the understanding of the machine. We can take the following ways to maintain and adjust.

 

The first is the adjustment of the chain. The adjustment is carried out after the motor stops. Press the chain with your fingers in the middle of the two sprockets. The compression amount is generally between 4 and 9 mm, which is the standard value. Once it exceeds the standard When it is worthwhile, adjust the idler to the specified tightness. Clean vegetable processing line Clean vegetable processing line.

 

The second is the spot inspection and refueling of the variable speed gearbox oil for the variable speed change of the clean vegetable processing assembly line. The first is to stop the motor, and it is strictly forbidden to remove the oil plug under the condition of smoke and fire. The oil has just flowed out to the appropriate amount. Supplement it when insufficient. Clean vegetable processing line Clean vegetable processing line.

 

The third is the adjustment of the belt. After the motor stops, in the middle of the two pulleys, the compression amount of the belt is pressed by the finger (middle finger and index finger) to 7-12mm as the standard value. When it is greater than the standard value, adjust the idler to the specified tightness. Clean vegetable processing line Clean vegetable processing line.

 

The fourth is that we do not use the storage clean vegetable processing line for a long time. When we want to store for a long time and do not use it, we can wash and wipe the various parts of the soil and other objects, and the attachment of each rotating part, belt and chain, etc. The sundries must be completely removed, and the rotating parts and friction active parts should be fully oiled to prevent the appearance of rust.

 

Contact Us