What are the common problems in the actual application of bone saw equipment?

Update:01-09-2020
Summary:

Important attention to the use of bone sawing machine: […]

Important attention to the use of bone sawing machine:

1. When installing the saw blade of the bone saw, pay attention to the direction of the saw blade, and the serration on the right cutting surface faces downward.

2. The scraper should press the saw band, but not touch the saw tip, otherwise it will increase the noise and shorten the service life of the saw blade. ,

3. When the bone sawing machine is not in use, it is best to loosen the saw band tension handle on the top of the machine 2 turns, and then tighten the handle when the machine is turned on next time, so as to increase the service life of the saw blade. 4. After the door of the bone sawing machine is opened, the safety switch will stop the machine, but the saw band will continue to rotate for a while under the action of inertia. Do not touch the saw band with your hands at this time.

4. It is recommended to wear safety protective gloves during operation to protect yourself from the saw blade!

5. Never hold the meat directly to cut without any protection, especially when sawing relatively small meat products, such as trotters. A high-speed saw band can hurt your fingers even if you wear gloves. Gloves can only delay and reduce the damage, and must not be careless. Concentrate and be careful when operating.

Contact Us