What are the repair and maintenance of the meat grinder?


Repair and maintenance of meat grinder With the continu […]

Repair and maintenance of meat grinder

With the continuous progress of science and technology, various mechanical equipments are continuously invented and improved, and gradually replace the labor force. The invention of the meat grinder has brought tremendous convenience to people's lives. To make the meat grinder work properly, its maintenance And maintenance work is also very important. In order to let everyone use the meat grinder better, we will introduce the maintenance and maintenance methods of the meat grinder for everyone.
1. Before using the meat grinder, first disassemble the machine for cleaning:
(1) Machine disassembly method: first unscrew the nut, remove the round knife and cross knife in sequence, and then take out the twisted dragon.
(2) Wash the meat grinder with water and detergent first.Because the machine is stained with oil, you can first grind some radishes and then wash them.
Second, after the machine is cleaned and dried, clamp the body to the edge of the table (the maximum thickness of the desktop is not more than 3.5cm), and tighten the fixing screws at the bottom of the body to enable the machine to clamp the desktop and fix it firmly.
Third, install the twisted auger, cross knife, round knife and nut in order; (Note: align the round knife with a gap to the protruding part of the fuselage and install it before the nut can be screwed normally, the nut should not be screwed too much (Tighten a little, loose a little, you can turn the handle normally) Finally, install the handle.
Fourth, it will be better to freeze the meat in the refrigerator and then mince it. Remove the skin, tendons and bones before mincing, and then cut into long strips (about 2cm wide), pay attention to the meat can not be cut too much, so it is not convenient to enter the meat , Add the meat one by one from the feed port, and then turn the handle clockwise to start ground meat.
The correct care and maintenance methods can not only ensure the normal use of the machine, but also extend the service life of the machine, the same is true for the meat grinder.

Contact Us